Solarmeter Model 9.2 Bilirubin Meter

Availability: In stock

$249.00

Quick Overview

Features:



  • Compact, Handheld, and Durable

  • Simple Single-Button Operation

  • NIST Traceable Accuracy

  • LCD Display

  • Made In USA


Applications:



  • Monitoring Bilirubin Light Intensity and Aging

  • Monitoring Blue Light / LED Intensity and Aging

  • Monitoring Aquarium Lamp Intensity and Aging

  • Monitoring Acne Lamp Intensity and Aging

  • Measuring Blue Light From Household Appliances

  • Measuring Photosynthetic Action Spectrum Blue Band

  • Testing Eyewear Actinic Blocking Capbilities

OR

Details

Product Video

Solarmeter Specifications

Radiometer
Model 9.2
Irradiation Range 0-1999 µW/cm²
Response at 450 nm 98%
Bandwidth 422-499 nm
Resolution 1 W/cm
Conversion Rate 3.0 Readings/Sec
Display 3.5 Digit LCD
Digit Size 0.4 (in) / 10.2 (mm) high
Operational Temperature 32°F to100°F / 0°C to 37.8°C
Operational Humidity 5% to 90% RH
Accuracy 10% REF.NIST
Dimensions
4.2L x 2.4W x 0.9D (in) / 106.7L x 61W x 22.9D (mm)
Weight 4.5 (oz) / 128 (g) Including Battery
Power Source 9-Volt DC Battery
Lens UV Glass
Diffuser Teflon
Detector GaP with filter
Agency Approval CE Mark

 

Solarmeter Model 9.2 Bilirubin Meter Spectral Response Graph


Sensor/Detector: GaP Photodiode packaged in hermetically sealed UV glass window cap. Filter used to narrow response as shown on the spectral response graph.

Operation: To operate your Solarmeter, aim the sensor window located on the top panel of the meter directly at a UV source. Press and hold the push-button switch on the face of the meter. For best results take note of the distance the reading was taken from the UV source in order to ensure repeatable results. Battery operation voltage is viable from 9V down to 6.5V. Below 6.5V, the numbers on the LCD display will begin to dim, indicating the need for battery replacement. Under typical service load, a standard 9V battery will last approximately 2 years.


Proper Usage of Solarmeter® Ultraviolet Radiometer

  • Wear actinic eye protection when checking blue lamps.
  • Allow lamps to warm-up prior to taking readings (at least 5 min).
  • Hold meter integral sensor close to source to measure individual lamp or LED intensity. Hold sensor at working distance from source for effective intensity.
  • When checking aging of lamps, keep measuring distance and locations constant.
  • Lamps should be replaced when output drops to about 70% of their original (new) readings.
  • If unsure of what new values were, replace a lamp with new one and compare old one.
  • Do not subject the meter to extremes in temperature, humidity, shock or dust.
  • Use a dry, soft cloth to clean the intrument. Keep sensor free of oil, dirt, etc.

More Information

Additional Information

Free Shipping No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

FOLLOW US:
My Cart

You have no items in your shopping cart.