Solarmeter® Model 7.0 UV In MED/hr.

0 out of 5

$249.00

Features:

  • Compact, Handheld, and Durable
  • Simple Single-Button Operation
  • NIST Traceable Accuracy
  • LCD Display
  • Made In USA

Applications:

  • Monitoring Instantaneous UV In MED/hr
  • Monitoring UV Lamp Intensity and Aging
  • Measuring Solar Intensity In MED/hr
  • Comparison Of Sources In MED/hr
  • Tracking Of UV In MED/hr Over Time
SKU: Solarmeter Model 7.0

Description

Solarmeter® Specifications
Model 7.0
Irradiation Range 0-199.9 MED/hr
Response 280-400 nm Diffey Erythermal Action Spectrum
Resolution 0.1 MED/Hr
Conversion Rate 3.0 Readings/Sec
Display 3.5 Digit LCD
Digit Size 0.4 (in) / 10.2 (mm) high
Operational Temperature 32°F to100°F / 0°C to 37.8°C
Operational Humidity 5% to 80% RH
Accuracy ±10% REF.NIST
Dimensions
4.2L x 2.4W x 0.9D (in) / 106.7L x 61W x 22.9D (mm)
Weight 4.5 (oz) / 128 (g) Including Battery
Power Source 9-Volt DC Battery
Lens UV Glass
Diffuser Teflon
Detector SIC/IF Photodiode
Agency Approval CE Mark

Solarmeter Model 7.0 UV Erythemally Effective Meter Spectral Response Graph


Sensor/Detector
Silicon Carbide (SIC) Photodiode packaged in hermetically sealed UV glass window cap. Interference filter blocks UV above erythermal response as shown on the Spectral Sensitivity Graph.

Operation
To operate your Solarmeter, aim the sensor window located on the top panel of the meter directly at a UV source. Press and hold the push-button switch on the face of the meter. For best results take note of the distance the reading was taken from the UV source in order to ensure repeatable results. Battery operation voltage is viable from 9V down to 6.5V. Below 6.5V, the numbers on the LCD display will begin to dim, indicating the need for battery replacement. Under typical service load, a standard 9V battery will last around 2 years.

Proper Usage of Solarmeter® Ultraviolet Radiometer Radiometer for Lamp Tests

  • Wear UV-block eye protection when checking UV lamps.
  • Allow lamps to warm-up prior to taking readings (at least 5 min).
  • Hold sensor close to lamp or acrylic to measure individual lamp MED intensity. Hold sensor at 25 cm above bench with canopy closed for body position reading. Te (Time to 4 MEDs in minutes) = 240 / MED/hr reading.

Additional information

Weight 0.5 lbs
Dimensions 7 × 3.5 × 2.5 in
Sort order

Download Data Sheet

Download Application Bulletin

Scientific Papers